Brow Factor x Brow Code Airbrush Brows Bundle
Create flawlessly airbrushed brows with the Brow Factor x Brow Code Airbrush Brows bundle, including all the products you need in order to create a beautiful set of brows for your clients.
You need to choose 4 out of the beautiful 10 shades on offer from Brow Code’s Stain range.
- 4 x 15ml Stain
- 50-75 min run time per charge of the airbrush machine
Please note we can only ship this product within the UK!
To see professional prices, please email a copy of a brow certificate to enquiry@labfactor.co.uk.
Description
Bundle Includes:
- 1 x Brow Factor Airbrush Machine Black
- 1 x Brow Factor Brow Shaping Guides – Multipack
- 1 x Brow Code Oxidant – Liquid
- 4 x Brow Code Stain Hybrid Dye (your choice)
Directions For Use:
- Begin by running water through the Airbrush for approximately 15 seconds. Adjust the dial to allow a 2-3 mm opening, which controls the Stain’s airflow.
- Perform a test spray on a cotton round to check for even dispensing. Test across all pressure modes. We recommend using your machine on the lowest setting.
- Once you achieve an even spray, the Airbrush is ready for use.
- Complete a patch test before proceeding with the service.
- Cleanse the brow area with an oil-free foaming cleanser. Rinse with a damp cotton pad. Ensure brows are dry and free of oils and sebum for optimal Stain Hybrid Dye adhesion.
- Brush the brows and map as desired.
- Use mapping thread or paste to shape the brows as desired.
- Starting from the head of the brow, apply the bottom Brow Border at a slight upward angle towards the arch, following the natural brow shape. Continue applying the border from the arch to the tail at a slight downward angle. Ensure the Brow Borders are aligned neatly and press down firmly with fingers or the back of tweezers. Inadequate application may allow Stain to seep through.
- Repeat the same process for the top Brow Border, ensuring symmetry and secure placement.
- Ensure the borders are secure to prevent the Stain Hybrid Dye from seeping beyond the desired area. Visually inspect the ‘Brow Borders‘ on both eyebrows to ensure symmetry.
- Shake the Stain Hybrid Dye bottle well before use. Fill the dispenser with a 1:1 ratio of Stain with Liquid Oxidant 3%, or approximately 8 drops Stain to 8 drops Liquid Oxidant, adjusting based on the size of your dispenser.
- Set the Airbrush Machine to your preferred speed and test spray onto a clean dry cotton pad to check the shade and consistency of the spray.
- Spray a light layer of Stain from the tail of the eyebrow towards the front of the brows. Let this layer set for 1-2 minutes. You may choose to work on each brow individually or simultaneously.
- Apply a second layer of Stain, following the same direction – from tail to front. Allow this layer to set for 1-2 minutes before proceeding.
- For the final layer, work from the tail towards the front, ensuring thorough coverage for the client’s desired look. The number of layers will determine the saturation level for the desired outcome. Typically, 2-3 layers are recommended for most clients. For a more natural appearance, 1-2 layers is recommended.
- After completing the Stain layering, carefully remove the Brow Borders. If required, use Brow Code Tint Remover or a damp cotton tip to clean the edges of the Airbrush brows.
- Allow the Stain to remain on the brows for 8 to 12 minutes, depending on the desired intensity and saturation level.
- Gently remove the Stain with a damp cotton pad, starting from the head of the brow and moving towards the tail. Be careful not to scrub back and forth to avoid removing the Stain Hybrid Dye from the skin.
- Brush the eyebrows into place to complete the Airbrush Stain application process.
Ingredients:
Brow Code Oxidant Liquid: Aqua, Hydrogen Peroxide, Ethanol, Cetearyl Alcohol, Sodium Lauryl Sulfate, Sodium Cetearyl Sulfate, Phosphoric Acid, Tetrasodium EDTA, Disodium Phosphate.
Brow Code Stain Hybrid Dye: Lawsonia Inermis Extract (Henna), Rosa Damascena Flower Extract, Crocus Sativus Flower Extract, Aloe Barbadensis Leaf Extract, Propylene Glycol, Isopropyl Alcohol, P-Phenylenediamine, p-Aminophenol, m-Aminophenol, Phenoxyethanol, 4-Amino-2-Hydroxytoluene, Ethanolamine, Sodium Sulfite, Disodium EDTA, Carbomer, Citrus Limon Peel Oil (Lemon Oil), 1-Naphthol, 1,5-Naphthalenediol.
Additional Information:
Patch test 48 hours before:
In order to reduce the risk of an allergic reaction, it is important to carry out a skin sensitivity or patch test. This skin sensitivity test must be carried out 24 to 48 hours before service for each new client, then every 6 months to ascertain if there is an allergy or sensitivity against the product or if such has emerged since the last application. Please be mindful that no reaction during the test is no guarantee that an allergic reaction will not occur during subsequent treatments.
Testing Procedure:
- Mix a small amount of the product to be used and apply a small amount to a small area on the inner bend of the elbow or behind the ear.
- Allow to dry and leave uncovered for 24 to 48 hours, then clean thoroughly.
- If any irritation occurs during this time do not carry out the treatment.
Delivery
All products are sent from ourselves and not a third party, using our authorised courier/ postal service . We check all orders before despatch to ensure your order arrives as specified and in perfect condition.
Returns
You have 14 days to return an item from the date you received it. To be eligible for a refund your item must be unused and in the same condition that you received it and in the original packaging. You should notify us of your intent to return an item and provide your Order Number reference.
If unwanted item returns arrive in poor or unsaleable condition, a refund will not be possible. You are solely responsible for ensuring that the items in question are returned to us. We will not be liable for returns that are lost in the post or lost for any other reason.
If you receive a faulty or damaged item, we will advise how to return it to us and we will refund the return postage cost. Replacements and / or refunds will only be dispatched / issued on receipt of the returned items.
Refunds
Refunds will only be processed up to 14 days from the sales invoice date. Refunds will be processed within 7 days of product arriving back with us. Payment will be made the same way the product was paid for (PayPal, Bank Transfer or Card payment). No refunds will be issued after 30 days of the sale invoice date.
Related products
-
Brow Code Pro Stain Hybrid Brow Dye Kit
-
Brow Factor Flexi Brow Shaping Guides – Straight
-
Mrs.Highbrow Airbrush Brows Online Masterclass
-
Brow Factor Brow Shaping Guides – High Arch