ÉLAN Eyebrow Lamination Expert System Brow Fix Up Step #2 – Airless Bottle

Description

Directions For Use:

1. Create the eyebrow shape (Step 1): Specify the processing time of the eyebrow lamination solutions according to the instructions following below:
   • 1st type: the eyebrow hairs are thick, spiky, not having undergone chemical procedures earlier (the eyebrow tinting or bleaching procedures) – processing time is 12–15 minutes;
   • 2nd type: the eyebrow hairs are of medium thickness, natural, healthy or having undergone chemical procedures earlier (the eyebrow tinting or bleaching procedures) – processing time is 6–12 minutes.
2. Prepare the eyebrows for the lamination procedure:
   • Use «ELAN professional line Cleansing detox-mousse for eyebrows and eyelashes with antibacterial effect» for the skin and hair degreasing before the eyebrow lamination procedure.
3. Create the eyebrow shape (Step 1)
   • Apply a thin layer of the argan oil cream by TM ELAN professional line on the eyebrows and a thicker layer – on the skin around the eyebrows. It is recommended to use the professional make-up brush BLACKWOOD #4 by TM ELAN professional line.
   • Apply Step 1 on the eyebrows. The processing time is 6–15 minutes. It is recommended to use the professional make-up brush BLACKWOOD #3 by TM ELAN professional line.
   • Cover the eyebrow area carefully with the special plastic film to enhance the solution effect. The processing time is 3–15 minutes. When the processing time is finished, remove the film and brush the hairs carefully setting them in the right direction. Check the hair condition. Cover the eyebrow area with the film again and leave it to develop for 3–5 minutes, if needed.
     NOTE! The maximum processing time should not exceed the processing time for the selected eyebrow hair type.
   • When the processing time is finished, remove the excess of the solution with a cotton pad, moistened with water.
     NOTE! It is important to take into consideration the eyebrow hair growth direction when creating the eyebrow shape. The eyebrow shape changes should be smooth in order to avoid folding of the hairs.
4. Fix the eyebrow hair direction (Step 2)
   • Apply a thin layer of the argan oil cream by TM ELAN professional line on the eyebrows and a thicker layer – on the skin around the eyebrows. It is recommended to use the professional make-up brush BLACKWOOD #4 by TM ELAN professional line.
   • Apply and spread Step 2 on the eyebrows setting the hairs carefully in the right direction.
     NOTE! The amount of the solution used at the IV-th stage of the eyebrow lamination procedure should be equal to the amount of the solution used at the III-rd stage of creating the eyebrow shape.
   • Cover the eyebrow area carefully with the special plastic film to enhance the solution effect.
     NOTE! The processing time at the IV-th stage should be equal to the processing time at the III-rd stage of creating the eyebrow shape. It is not allowed to reduce the processing time.
   • When the processing time is finished, remove the excess of the solution with a cotton pad, moistened with water.
   • Remove the excess of the solution with a cotton pad, moistened with water
   • Apply «ELAN professional line Cleansing detox-mousse for eyebrows and eyelashes with antibacterial effect» on the eyebrows to stop the chemical reaction. Remove foam with a cotton pad, moistened with water.
   • Use «ELAN professional line COLOUR FIX: colour fixing fluid for eyebrows and eyelashes with keratin and sunflower seed oil» for the better results, if the eyebrow tinting procedure is not planned, when the lamination procedure is finished.
   • Apply the tinting mixture immediately after using «ELAN professional line Cleansing detox-mousse for eyebrows and eyelashes with antibacterial effect», if the eyebrow tinting procedure is planned, when the lamination procedure is finished.
     NOTE! It is necessary to take into consideration that the eyebrow hair colour is supposed to be brighter and appear faster on the hairs when the eyebrow tinting procedure is performed.
   • Use «ELAN professional line COLOUR FIX: colour fixing fluid for eyebrows and eyelashes with keratin and sunflower seed oil» for the better results after the eyebrow tinting procedure.
     NOTE! The eyebrow shaping must be performed only when the eyebrow lamination procedure is finished. It is highly recommended to use the eyebrow tweezers in order to avoid serious skin damage.

Ingredients:

Aqua, Cysteamine Hcl, Ethanolamine, Ammonium Acryloyldimethyltaurate/vp Copolymer, Urea, Propylene Glycol, Cetrimonium Chloride, Peg-40 Hydrogenated Castor Oil, Sodium Erythorbate, Sodium Sulfite, Hydrolyzed Keratin, Xanthan Gum, Disodium Edta, Styrene/acrylates Copolymer, Diazolidinyl Urea, Methylparaben, Propylparaben, Parfum, Linalool, D-limonene, Geraniol, Citronellol

Additional Information:

• It is not recommended to perform henna eyebrow tinting and eyebrow bleaching because the result can be highly unpredictable: the hair structure can be damaged (dry and dull hairs), which can cause hair fragility and loss.
• It is highly recommended to avoid saunas, solariums and any mechanical damage to the created eyebrow shape (e.g. sleeping face down on the pillow) for 24 hours after the eyebrow lamination procedure.
• It is highly recommended to avoid using aggressive cosmetic products and undergoing aggressive cosmetic procedures (scrubs, face peels, alcohol-based lotions, laser treatments) for 48 hours after the eyebrow lamination procedure.