ÉLAN Keracare Lash & Brow Caring Serum – Step 3

Description

Directions For Use:

NOTE! The room temperature directly affects the product’s activity — the higher the temperature, the faster the reaction rate.

Exposure Timings:

• The maximum exposure time for KeraSoft Eyelash and Eyebrow Lifting Serum Step 1 is 10 minutes.

Eyebrow Lamination Procedure: 

1. Use ELAN DETOX FOAM to cleanse the eyebrow hairs and skin before the eyebrow lamination procedure. Remove the foam with a cotton pad moistened with water. NOTE! If the client has thin and sensitive skin, it is necessary to apply ELAN SKIN PROTECTOR protective cream with argan cream oil to the eyebrows (thin layer) and the areas of skin around the eyebrows (thick layer).
2. Apply KeraSoft Eyelash and Eyebrow Lifting Serum Step 1 to the eyebrows –exposure time: 5–10 minutes.
3. After the exposure time has elapsed, remove the remaining product using a cotton pad moistened with water.
4.  Apply KeraBoost Eyelash and Eyebrow Fixing Serum Step 2 to the eyebrows and distribute it evenly over the entire surface, carefully laying the hairs in the desired direction—exposure time: 7 minutes.
5. After the exposure time has elapsed, remove the remaining product using a cotton pad moistened with water or ELAN DETOX FOAM. If using foam, remove the foam with a cotton pad moistened with water.
6. After applying KeraBoost Eyelash and Eyebrow Fixing Serum Step 2 or undergoing an eyebrow tinting procedure, apply KeraCare Eyelash and Eyebrow Care Serum Step 3 to the pre-cleansed eyebrow area and distribute it evenly. Leave it on until fully absorbed. The product does not require rinsing.

NOTE!

• If an eyebrow tinting procedure is planned after completing the lamination procedure, apply KeraCare Eyelash and Eyebrow Care Serum Step 3 after applying the ELAN COLOUR FIX colour-fixing fluid.
• It can also be used as a care product after the tinting procedure and as a product that minimizes the darkening of the eyebrow hairs before the tinting procedure.

Eyelash Lifting Exposure Timings:

•  Medium thickness eyelash hairs, previously treated with chemical compounds (lifting, tinting, bleaching) — KeraSoft Eyelash and Eyebrow Lifting Serum Step 1, exposure time: 8-10 minutes;
• Thin eyelash hairs, previously treated with chemical compounds (lifting, tinting, bleaching) — KeraSoft Eyelash and Eyebrow Lifting Serum Step 1, exposure time: 5-7 minutes.

Eyelash Lifting Procedure:

1. Use ELAN DETOX FOAM to cleanse the eyelashes before the lifting procedure. Remove the foam with a cotton pad moistened with water.
2. Secure a silicone pad of the appropriate size on the upper eyelid.
3. Distribute and secure the eyelashes on the pad using ELAN professional line eyelash lamination fixing gel and an applicator.
4. Apply KeraSoft Step 1 to the area where the eyelash curl will be formed. Exposure time: 5-10 minutes. NOTE! The exposure time and type of product (KeraSoft Eyelash and Eyebrow Lifting Serum Step 1 or KeraSoft Eyelash Lifting Serum Step 1) must correspond to those indicated for the chosen group of eyelashes.
5. After the exposure time, remove the product residue first with a dry brush in the direction of eyelash hair growth and then with a micro brush or cotton swab moistened with water.

KeraSoft Eyelash and Eyebrow Fixing Serum Step 2 without tinting Directions: 

1. Apply KeraBoost Eyelash and Eyebrow Fixing Serum Step 2 to the entire eyelash area with a thick layer.
2. Exposure time: 7 minutes.
3. After the exposure time, remove the residue of the product first with a dry brush in the direction of eyelash hair growth and then with a micro brush or cotton swab moistened with water or ELAN DETOX FOAM. If foam is used, remove the foam with a cotton pad moistened with water.

Fixation of eyelash hair direction with tinting on a pad– KeraBoost Eyelash and Eyebrow Fixing Serum Step 2 + KeraTint Eyelash Tint

1. Mix KeraTint Eyelash Tint and KeraBoost Eyelash and Eyebrow Fixing Serum Step 2 in a non-metallic container at a ratio of 1:2.
   NOTE! The colour of the tint in the bottle may vary from light brown to black due to contact with air after opening the package. This is normal for the dyes used and does not affect the result of eyelash colouring.
2. Apply the mixture to the entire eyelash area with a thick layer. Exposure time: 7 minutes.
3. After the exposure time, remove the residue of the mixture first with a dry brush in the direction of eyelash growth and then with a micro brush or cotton swab moistened with water or ELAN DETOX FOAM. If foam is used, remove the foam with a cotton pad moistened with water.
4. To fix the result obtained after tinting, apply ELAN COLOUR FIX colour fixing fluid to the eyelashes.5.1 After using KeraBoost Eyelash and Eyebrow Fixing Serum Step 2 or a mixture of KeraTint Eyelash Tint + Eyelash and Eyebrow Fixing Serum Step 2, apply a small amount of KeraCare Eyelash and Eyebrow Care Serum Step 3 to cleanse eyelashes and evenly distribute. Leave on until completely absorbed. The product does not require rinsing.

Ingredients:

Aqua, Cetearyl Alcohol, Glycerin, Hydrogenated Polyisobutene, Dicaprylyl Ether, Cetyl Esters, Trehalose, Phenoxyethanol, Ethylhexylglycerin, Glucosyl Ceramide, Phospholipids, Acrylates/c10-30 Alkyl Acrylate Crosspolymer, Cholesterol, Sodium Hydroxide, Ceteareth-20, Simmondsia Chinensis Seed Oil, Hydrolyzed Wheat Protein, Hydroxyethylcellulose, Hydrolyzed Vegetable Protein, Tocopherol, Potassium Sorbate, Benzyl Alcohol, Dehydroacetic Acid, Sodium Chloride, Sodium Sulfate, Parfum, Citric Acid, Ci 61570, Ci 47005.