OkO Eyebrow & Eyelash Lamination Airless Pump #3 Recovery & Care

Description

Directions For Use:

1. Before starting the procedure, it is important to correctly assess the structure and condition of the hairs. The hairs can be porous, medium porous, or highly porous. This information helps to determine the exposure time.
2. Remove any makeup residue with micellar water or eye makeup remover.
3. Degrease lashes/eyebrows with any foaming shampoo or saline solution.
4. Apply OkO LIFT #1 to lashes/brows with a synthetic brush or microbrush.
5. For lamination of eyelashes, the solution must be applied to the place where the roller is bent (the most convex part). Spread the product in an even, loose layer through the hair, trying to minimize contact with the skin.
6. Can be used under film or without it.
7. The processing time of step 1 is 6 to 13 minutes. The maximum exposure time of the composition should not exceed the exposure time for the selected hair group. Check the condition of the hairs every 3-4 minutes. The hair should absorb the composition and become more malleable.
8. After the exposure time has elapsed, carefully remove the product with a dry cotton swab.
9. Apply and carefully spread No. 2 OKO FIX. Maintain eyelash alignment/brow direction.
10. Can be used under film or without it.
11. The exposure time of composition No. 2 is from 5 to 12 minutes (The fixation stage is responsible for restoring bonds within the hair. It is impossible to reduce the exposure time of composition No. 2).
12. After the exposure time, remove the product with a dry cotton swab.
13. After exposure to composition #2 and before using composition #3, eyebrow correction and colouring of eyebrows or eyelashes can be performed.
14. Apply composition #3 to lashes/eyebrows. The third stage does not need to be washed off and remains on the hairs.

Processing Times:

Step 1 OkO Lift

• Fine hair: 6-8 minutes
• Normal hair: 9-11 minutes
• Dense, thick hair: 12-13 minutes

Step 2 OkO Fix

• Fine hair: 5-7 minutes
• Normal hair: 8-10 minutes
• Dense, thick hair: 11-12 minutes

Step 3 OkO Care

• No rinsing required

At-Home Use:

Step 3 is suitable for home care after eyelash lamination or long-term eyebrow styling. It creates a protective layer on the eyelashes and is easy to use. The thick consistency helps to prevent the product from flowing into the eyes and does not cause discomfort.

Ingredients:

Aqua (water), C12-20 Acid PEG-8 Ester, Glycerin, Cetyl Alcohol, Argania Spinosa Kernel Oil, Caprylic/Capric Triglyceride, Ricinus Communis Seed Oil (Ricinus Communis (Castor) Seed Oil), Simmondsia Chinensis Seed Oil (Simmondsia Chinensis (Jojoba) Seed Oil), Sodium Hyaluronate, Hydrolyzed Wheat Protein, Algae Extract, Cetrimonium Chloride, Phenoxyethanol, Imidazolidinyl Urea, Panthenol, Tocopheryl Acetate, Tetrasodium Glutamate Diacetate, Ethylhexylglycerin, Citric Acid

Additional Information:

• Lash and brow laminating products are for professional use only;
• Be sure to follow the instructions for working with compositions;
• It is necessary to work with the compositions with appropriate gloves. This will make the procedure safe and sterile;
• Do not use on or near irritated or injured skin;
• Avoid contact with eyes. In case of contact with the eyes, rinse immediately with water. Prevent product from getting inside;
• Store out of the reach of children;
• Work with the product in a well-ventilated area;
• Do not use after highlighting brows and do not lighten after the lamination procedure;
• Allergy. Some clients may experience an allergic reaction upon skin contact. It can manifest as redness of the skin, inflammation, rash, and other reactions. In this case, you should consult a doctor.
• It is recommended to perform a sensitivity test 48 hours before the procedure.
• Storage and disposal. Close the sachet well after use to avoid contact with air. Store in a cool and dry place, and avoid direct sunlight. Throw away the sachet when it’s completely empty. Dispose of according to national regulations.